CONTROLS & CONNECTIONS
INSTALLATION
Power/Volume
Button
Microphone
Micro SD
Card Slot
Emergency Recording Button
Micro
USB Port
HDMI
Output
LED
Indicator
Quick Release
Mount
Button 4
Button 1
Button 3
Button 2
GPS Port
The functions of Buttons 1-4 are indicated by the icon directly above
each button and change depending on the state of the unit.
MOUNT
CAM 1 - Screw the suction cup into
the Quick Release Mount. Slide the
mount into CAM 1 and press the lever
to secure the unit to your vehicle’s
front windshield.
CAM 2 – Attach CAM 2 to the
windshield using the adhesive tape.
CAM 2 is most commonly installed
facing out the rear on the top center
of the rear windshield. It can also be
mounted on the front windshield
to record the interior of the vehicle.
1
Windshield
Back Window
Reset Button
To Next Page
Loading...
