OPTIONALS SUPPLIED ALONG WITH THE CRANE
Description YES NO
Oil tank
Outrigger beam - (mechanical jack)
Outrigger beam - (hydraulic jack)
The table has to be filled carefully with the above option when purchased
PRELIMINARY INFORMATION
Operator’s and maintenance manual of MAXILIFT COBRA 5500 SERVICE CRANE
Manual code: MD.0.176
This manual is valid starting from serial no: .......
Manufacturer: NEXT HYDRAULICS S.r.l.
Via Mediterraneo 6, I 42022 BORETTO Reggio Emilia
In this booklet the word “Manufacturer” is referred to “NEXT HYDRAULICS S.r.l.”
List of documentation supplied along with the CRANE:
• Operator’s and maintenance manual (for the end user)
SERIAL NO:..............................................................
YEAR OF MANUFACTURING:.................................
ATTENTION
Always carefully read this manual before operating the crane. Most of the accidents occurred during opera-
tions are caused by the omission of elementary precautions and non fulfillment of the safety instructions.
Many accidents can be avoided when their causes are well known and the relevant adequate counter mea-
sures are previously taken.
To Next Page
Loading...
Need help?
General