Cobra MR HH600W FLT GPS BT User Manual

VHF Marine Radio Protocols
17
Nothing Comes Close to a Cobra
®
VHF Marine Radio Protocols
16
English
Getting Started
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
Operating Your Radio
EMERG
USA 6W MEM
41° 54.523N
087° 47.192W
DATE:06/01
TIME:10:00
SCAN
H/M/L
MEM MORE
ROG
16
SCAN Button
SCAN
Press and release the SCAN soft key to scan all channels. Scanning
begins at the selected lower channel, and scans to higher channels.
Press the Channel Up/Down button to change the scan direction.
When a signal is received in SCAN mode, the radio will pause 10
seconds before resuming SCAN operation. The scan will stop on the
paused channel and remain there when the Talk button is pressed.
If memory channels are saved, press and release the SCAN button to
scan all memory channels.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
If even one memory channel is saved, SCAN will only scan
memory channels.
Squelch Control
Squelch Control lters weak signals and radio frequency (RF) noise
so that you will clearly hear the signals you want.
The Squelch Control on this radio is set through the following
keypad operation.
To Set Squelch Control:
1. With the power On, press the SQL button to access the
squelch screen.
2. Press the Channel Up and Channel Down soft keys to set
level. The signal level graphic shows squelch level 1 - 8.
3. To adjust your squelch, press the Channel Down soft
key until you hear a hissing sound, then press
and release the Channel Up soft key until the hissing
stops. This will establish a “Baseline” squelch.
4. By pressing the Channel Up soft key further, you will lter
weak and medium strength signals. By pressing Channel
Down soft key, you will receive weaker signals.
5. Press the Enter soft key to save this entry and move to the
next Setup mode programming.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution Warning
Installation
Customer
Assistance
NOTE
If the Squelch is set so that you can hear a continuous hissing
sound, the Memory Scan and Tri-Watch functions will be
unusable.
Squelch Control
Setup Mode Programming
Set-Up Routines
•
Settings Menu
The Settings menu in the CobraMarine VHF radio allows you to turn On and Off many of
its features, to adjust other features to suit your preferences, and to enter your user MMSI
number.
To Enter The Settings Menu:
Press the Menu button.
The Settings menu will appear on the LCD.
After entering the Settings menu, you can scroll
through it to make as many entries as you like.
Whenever the setting selection highlight appears in a feature
portion of the menu, the current active setting is highlighted.
When you are nished with changes, you can exit the Settings
menu by pressing the Exit soft key and return to Standby mode.
To Exit The Settings Menu:
Use the Up/Down buttons to scroll down to EXIT at the bottom
of the menu, or press the Exit soft key to move up through the
menu until the radio returns to the Standby mode.
NOTE
Basic set-up routines are described here. For set-up routines
that apply specically to a particular function, they are included
in the section for that function.
Channel Up/Down Buttons
Menu Soft Key
MENU
DSC SETUP MENU
LAMP ADJUST
CONTRAST ADJUST
KEY TONE
UIC CHANNEL MODE
TIME ADJUST
EXIT ENTER
MRHH600_ENG_MANL.indd 16-17 4/3/17 5:03 PM

Cobra MR HH600W FLT GPS BT Specifications

General

Brand	Cobra
Model	MR HH600W FLT GPS BT
Category	Transceiver
Language	English