NOTE
If the record memory is locked (rewind icon ashing),
press and hold the REW button to unlock.
1. Press and hold SCAN button for two (2) seconds to enter
Record mode. The matrix will display MIC RECORDER.
2. Press and hold PTT button to begin recording
from radio microphone. The transmitter will turn off. The
matrix will display MIC RECORDER ON and the seconds
remaining will be shown in the lower right corner. If PTT
button is released, recording stops. While recording,
a 20-second countdown begins on display. When
20-second countdown time has ended, recording stops
and two (2) beep tones will be heard.
3. Press and hold SCAN button again for two (2) seconds or
press MEM/ESC button to cancel recording and return to
last operation.
The radio has a Cobra exclusive playback feature, Rewind-Say-Again
®
. This feature allows
you to replay the last 20 seconds of an incoming audio transmission. It also allows you to
record call details including position coordinates, call signs, registration numbers and store
details that will help authorities locate a distressed vessel.
Example 1:
When engine noise, music or conversation creates too much noise to hear an inbound
message clearly, press the Rewind-Say-Again
®
button to enter the Rewind-Say-Again
®
menu to be able to hear the message a second time. This feature eliminates asking the
sender to repeat the message.
Example 2:
When listening to an urgent distress of an excited caller with confusing background noise,
press the Rewind-Say-Again
®
button to enter the Rewind-Say-Again
®
menu to be able to
hear the message a second time and get lifesaving information.
Operation of Rewind-Say-Again
®
1. From the Standby mode, press the Rewind soft key after
the last inbound audio transmission. The last recording will
immediately start to play back.
2. Using the Up/Down soft keys or the channel Up/Down
buttons scroll to the PLAY RECORDING menu option.
3. Press the ENTER soft key to hear the recording again.
4. The radio automatically replays the last 20 seconds of the
previous audio transmission.
5.
Press the Rewind key a second time to exit the Rewind menu
and return to Standby mode.
Setup and Advanced Operation of Rewind-Say-Again
®
Operation of Rewind-Say-Again
®
:
1. Rewind is set to ON by default. The Rewind icon will appear
on the Standby screen when Rewind is on (see illustration).
a. To Turn REWIND Off - press the Rewind key to enter
the Rewind-Say-Again menu. With OFF: Exit REWIND
selected, press the Enter soft key to exit and turn OFF the
Rewind function.
b. To Turn REWIND ON - press the Rewind key to enter the
Rewind-Say-Again menu. With OFF: EXIT REWIND
highlighted, press the Rewind key. This turns on Rewind
and exits to VHF Standby mode.
The Rewind-Say-Again function also has several advanced
options. In addition to the recording of an incoming transmission
the user can also record a personal message for playback
later. This could be useful for navigation, emergency or vessel
operation information if a pen and paper are not available or
practical. The options available are:
2. PAUSE RECORDING - Pause recording of incoming
audio transmissions.
3. PLAYBACK RECORDING - Playback recorded incoming
audio. This can be used to repeat the playback again.
4. SAVE RECORDING - Saves recorded incoming audio.
5. ERASE RECORDING - Erases the saved recording.
6. TRANSMIT RECORDING - Transmit recorded message.
7. RECORD MESSAGE - Record a message (using the
microphone to record the message, using the PTT key
to start and stop the recording).
8. PLAY MESSAGE - Playback the recorded message.
9. SAVE MESSAGE - Save the recorded message.
10. ERASE MESSAGE - Erases the saved message.
11. TRANSMIT MESSAGE - Transmit the recorded message.
Rewind-Say-Again Button
Channel Up/Down Buttons
REWIND-SAY-AGAIN
OFF:EXIT REWIND
PAUSE RECORDING
PLAY RECORDING
SAVE RECORDING
ERASE RECORDING
TRANSMIT RECORDING
EXIT ENTER
Rewind-Say-Again Key
REWIND-SAY-AGAIN
ERASE RECORDING
TRANSMIT RECORDING
RECORD MESSAGE
PLAY MESSAGE
ERASE MESSAGE
TRANSMIT MESSAGE
EXIT ENTER
Rewind-Say-Again Icon
MRHH600_ENG_MANL.indd 38-39 4/3/17 5:03 PM
To Next Page
Loading...
Need help?
General
