Mobile Phone Operation
With Bluetooth
®
NOTE
Please refer to the Bluetooth Mode Pairing and Programming section on page 28 for
instructions on how to pair your mobile phone with this device. The following section
covers how to complete a phone call and other basic operations.
Answer Incoming Phone Calls
Mobile Phone Operation with Bluetooth
®
This handheld radio, once properly paired and connected to
your Bluetooth
®
compatible mobile phone, can answer incoming
calls received on your mobile phone. It can act as the speaker and
microphone, while your mobile phone stays safe and dry. It will also
improve audio quality on both ends of the conversation.
To Answer and End an Incoming Call:
1. The speaker will ring. The screen will display ANSWER/
DECINE and the caller ID, if available.
2. Press and release the ENTER soft key to answer the
call. After the call is answered, the screen will display
ACTIVE CALL.
3. Begin conversation with the caller by a pressing the
PTT (Push to Talk) key and speaking into the small
microphone above the LCD. This is very similar to a
standard radio operation and it completely eliminates
all background noise when you are not speaking.
NOTE
To enable hands-free conversation or “VOX” mode
(pressing in the PTT key not required), see the Bluetooth
setup instructions on page 29.
4. To end a call, press and release the END soft key. The
radio will then return to previous Standby mode and
resume normal operation.
VHF Marine Radio Protocols
Operating Your Radio
Initiate a Phone Call
There are several ways to initiate a call. These include initiating
(as normal) from the mobile phone, using voice dialing and last
number redial.
To Initiate from the Mobile Phone
1. Simply dial a number on your mobile phone.
(See manufacturer’s instructions for making a call.)
When the phone’s Send key is pressed, the radio will
respond by changing over to Bluetooth mode and the
matrix will display ACTIVE CALL and the option to END.
41
Nothing Comes Close to a Cobra
®
To Next Page
Loading...
Need help?
General
