Volume:
Allows you to raise and lower the volume of notifications and button beeps from your camera.
WDR:
Enabling Wide Dynamic Range allows your camera to accurately capture footage in very bright
conditions. Enabling this feature is recommended for most recording conditions.
GPS Format:
Choose between Decimals and Degrees as the GPS format that is stamped in the watermark.
Frequency:
Choose between 50Hz and 60Hz as your operating frequency if you are experiencing flickering in
your video.
Format Reminder:
Choose the recurrence at which you are reminded to format the Micro SD card. Formatting the
SD card frequently ensures your videos are protected and the SD card is saving content properly.
Delete Videos Reminder:
Set this to be periodically reminded to free up locked video content so that the camera does not
run out of “Emergency Recordings” and “Favorites” space.
Restore Defaults:
Resets the device to factory settings. Note that restoring defaults will NOT erase data on your
memory card.
Format SD Card:
Allows you to format the inserted SD Card. NOTE: This action will permanently delete all data
on the card. It is recommended to format any new card and periodically format existing cards.
About
You can use this setting to view your cameras electronic serial number, manufacturer part
number, and Firmware
To Next Page
Loading...
Need help?
General
