Cobra XRS 9670 - Alert Muting and Auto Mute; Manual Alert Muting; Auto Mute Mode Configuration

~ ..
- S tt"
.. • ~ e In s
Your Detector
Muting an Alert
Your detector allows you to quickly turn Off an Audio Alert by momentarily
pressing the Program/Mute button. If you press the Program/Mute button
a second time during the Alert, the Audio Alert will be turned back On.
Program/Mute Button (i) ..
Press and release
None None
Auto Mute Mode
Auto Mute will automatically reduce the audio volume of all alerts after four (4)
seconds for as long as the signal is detected. The factory setting for Auto Mute is On.
Tone Visual Display
Auto Mute On Two beeps
To Turn Auto Mute On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to Auto Mute.
One beep
Auto Mute Off
Auto Mute On Auto Mute Off
Auxiliary Audio Jack
The Auxiliary Audio Jack can be
used to connect an external speaker
in environments with high ambient
noise levels. The internal speaker
will be disconnected.
@English
....• Auxiliary
Audio
Jack