Cobra XRS 9670 - Radar Band Detection Settings; Pop Alert Configuration; X, K, and Ku Band Detection Control; Band Detection Configuration via Program Mode

~ Settin 5
Your Detector
Pop Alert
The Pop Mode Radar Gun is a single-pulse Doppler radar that is a feature
of a K and Ka (Bee "' Ka radar gun) band Instant-On radar gun. It uses
a single, short-time pulse to measure the target vehicle's speed.
The Pop mode receiver senses Pop singles beyond the effective range of
Pop radar guns. As the Pop mode receiver is so sensitive, you should limit
the use of Pop Detect mode to highway and rural driving.
Pop Alert will alert you to Pop radar signals. During the alert, the unit
continues to detect other signals. The factory setting is Pop Detect Off.
Tone Visual Display
Pop On
Pop Detect On
Pop Detect Off
Pop On Two beeps
To Turn Pop Detect Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to Pop Detect.
One beep Pop Off
Pop Off
K, Ku and X Band Detection
The new Ku Band may be introduced to North America in the future. To prevent
false alerts until it is, the factory default for Ku Band detection is Off. In parts of
North America, annoying false alerts from door openers and similar devices are
triggered on the X Band and K Band. If desired, X Band or K Band can be turned
Off. The factory default for X Band and K Band detection is On.
Tone Visual Display
X-Band On Two beeps
To Turn X, K and/or Ku Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to X, K or Ku band.
One beep X-Band Off
X-Band On
Two beeps
One beep
K-Band On
K-Band Off
X-Band Off
Two beeps Ku-Band On
X-Band Off
One beep
Ku-Band Off
K-Band On
K-Band Off
Ku-Band On
Ku-Band Off
K-Band On
K-Band Off
Ku-Band On
Ku-Band Off
Comes Close to a Cobra
illl
[!!J