Cobra XRS 9670 - Spectre Detection Settings; Spectre I & IV+ Detection Overview; Spectre Detect Mode Configuration; Spectre Detection Configuration via Program Mode

~ Settin s
Your Detector
Spectre I & IV+ Alerts
Police use radar detector detectors (RODs) to spot users of radar detectors.
Your detector is able to identify signals from Spectre I and Spectre IV+ RODs
and can provide alerts when any of these or similar devices are in use near
your vehicle.
Your detector can be spotted by Spectre IV+ RODs, but is invisible to
Spectre I RODs. You can choose whether or not you want your unit to show
Spectre Alerts. With Spectre Detect mode On, you can also choose whether or
not you want your unit to sound audible Spectre Alerts. The factory settings are
Spectre Detect Off, Spectre Audio Off.
Tone Visual Display
spectre On Two beeps
To Turn Spectre Detect Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to Spectre Detect.
One beep Spectre Off
Spectre Detect On
Spectre Detect Off
Spectre On
Spectre Off
Tone Visual Display
Spectre Audio On
Two beeps
To Turn Spectre Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to Spectre Audio.
One beep Spectre Audio Off
... Audio On ... Audio Off
Nothing Comes Close to a Cobra~ ~