19
ORANGE
Change program
Program 1 to 3
YELLOW
Change motor direction
forward/reverse drive
9. Starting operation – Foot control
Reverse operation
You can switch between forward and reverse operation by
pressing the YELLOW button. On selecting reverse operation,
an audible signal can be heard and the selected program button
flashes. Before the motor starts in reverse operation, there is a
delay while 3 audible warning signals are given.
Changing program
The programs 1–3 can be selected in ascending sequence by
operating the ORANGE button.
When changing from program 3 to program 1, a longer
confirmation signal is heard.
With each program change, the motor direction is
automatically set to forward operation.
Pump ON/OFF
Only when the motor is stationary the pump can be switched
on or off by operating the GREEN button of the foot control.
When pump operation is active, the pump symbol appears on
the display.
To Next Page
Loading...
