8
2. Safety notes
– Never touch the patient and the connection for
the foot control simultaneously.
– Check the parameter settings every time the
device is restarted.
Use only suitable and serviceable tools
Ensure that you comply with the manufacturer’s
instructions for surgical contra-angle handpieces
with respect to maximum speed, maximum torque,
forward and reverse movement.
Inappropriate use
Improper use, in addition to incorrect assembly,
installation, modification or repairs of the Osscora
surgical set or non-compliance with our instructions
invalidates all claims under warranty and any other
claims.
Please ensure that you carry out the following
instructions:
– Before using the Osscora surgical set for the first time,
store it at room temperature for 24 hours.
– Only fit the contra-angle handpiece when the motor is at
a complete standstill.
– Never touch rotary instruments that are
still rotating.
– Never touch the chuck mechanism of the
contra-angle handpiece while it is still running.
– Always ensure correct operating conditions and
that adequate cooling is delivered.
– Avoid overheating at the treatment site.
– Check the Osscora surgical set, the contra-angle
handpiece and the motor with cable for damage and
loose parts each time before use. Correct any faults or
refer to your local Cochlear office. Do not operate the
Osscora surgical set if it is damaged.
– When changing the fuse, disconnect the unit
from the power supply and only use original fuses.
– Perform a test run prior to each treatment.
To Next Page
Loading...
