44
14. Osscora contra-angle handpiece
Reassemble Osscora contra-angle handpiece
Insert the middle gear into the contra-angle head. Check
free running of the chucking system (a).
Insert the knee (4 positions are possible) onto the contra-
angle head until it engages.
Put the shaft in the knee and mind the position of the
rotational lock (b). Check free running rotation (c).
Press the sheath firmly against the knee and turn until
it engages.
Attach the spray clip.
Only assemble components with corresponding type
and serial number. Exception: components may be
changed at service or repair - these may have a new
serial number.
c
a
b
To Next Page
Loading...
