Cochlear Kanso 2 - Using Your Processor; Pairing with Remote Devices; Device Compatibility

6 KANSO 2 SOUND PROCESSOR USER GUIDE
Pair with remote devices
Before using your processor with a compatible Apple
®
or
Android
™
device, or the Cochlear Remote Control, you
need to pair your processor with the remote device.
Please refer to the app or remote user guides for details.
WARNING
Consider security when connecting your sound processor to
devices such as smartphones or tablets. Only connect to
devices that are protected, e.g. password or PIN access control.
Do not connect to devices that have had their operating
system altered.
Made for iPhone
Your Kanso 2 Sound Processor is a Made for iPhone
®
/
iPod
®
/ iPad
®
hearing device. This allows you to use the
control and audio streaming functions of compatible Apple
devices.
If you wear a sound processor on one ear and a compatible
hearing aid on the other, you can control them both and
stream audio to both using a compatible Apple device.
Your clinician can check compatibility and set this up for
you.
Android
Your Kanso 2 Sound Processor is compatible with the
ASHA (Audio Streaming for Hearing Aid) protocol. This
allows you to use the audio streaming functions of
compatible Android devices.