34 KANSO 2 SOUND PROCESSOR USER GUIDE
Change the magnet
Use the Kanso 2 Magnet Tool to change your magnet.
If the Kanso 2 Magnet is too weak your processor may fall
off. If the magnet is too strong it may cause discomfort.
Magnet strength ranges from ½ (weakest) to 6 (strongest)
for standard magnets and ½(I) (weakest) to
5(I) (strongest) for ‘(I)’ magnets.
NOTE
If your clinician has given you a Kanso 2 Magnet Reverse Polarity,
use it as described here for a standard magnet.
Remove the magnet
To remove the magnet from your processor:
1. Place the tool on the magnet.
Insert the tool ridges into the
magnet grooves.
2. Turn the tool anti-clockwise
and pull the magnet out.
To Next Page
Loading...
