Power
20 Nucleus 8 Sound Processor User Guide
Attach the battery module
1� Fit the parts together with the battery module at a slight angle
to the processing unit socket.
Rechargeable battery module:
align raised marker and arrow
on battery module towards back
of processing unit
Disposable battery module:
align indents and lock on battery
module towards back of
processing unit
2� Twist the battery module as shown to attach the parts.
Your sound processor will turn on automatically.
Note: If you do not connect the sound processor to your implant,
it will turn o automatically after two minutes, if enabled by your
clinician.
To Next Page
Loading...
