Cochlear Nucleus 8 - Attach a Softwear Pad

Wear
58 Nucleus 8 Sound Processor User Guide
Attach a SoftWear pad
The Cochlear SoftWear pad is optional. If you experience
discomfort from your coil, you can attach this adhesive pad to
the head side of your coil.
1� Peel o the single backing
strip on the adhesive side
of the pad.
2� Attach the pad to the head
side of the coil–press
down rmly.
3� Peel o the two semicircle
backing covers on the
cushion side of the pad.
4� Wear your sound
processor as usual.
Note
• The SoftWear pad may aect your sound processor’s
performance. If you notice any change, contact your clinician.
• Do not use the SoftWear pad with a Cochlear Nucleus 8 Aqua+
Coil or the Cochlear Coil Spacer.