Cochlear Nucleus 8 - People with Two Implants; People with CI600 Series Implants

Wear
Nucleus 8 Sound Processor User Guide 43
People with two implants
You can ask your clinician to give you coloured stickers (red for
right, blue for left) to make identifying your sound processors
easier.
Caution: If you have two implants, you must use the correct sound
processor for each implant.
Note: If you have newer implants, your sound processor will
recognise the implant’s ID and will not work on the wrong implant.
People with CI600 Series implants
If you have a CI600 Series implant, avoid sliding your coil
sideways onto your implant. This could cause the coil magnet to
misalign with your implant. Always place the coil down onto your
implant.
To place the coil on your head:
1� Hold the coil slightly above the implant location on your
head.
2� Rotate the coil slightly in both directions (clockwise and
anti-clockwise).
3� When you feel a strong pull, place the coil on
the implant.
4� Rotate the coil to a comfortable position for wearing.