Nucleus 8 Sound Processor User Guide 63
Care
Regular care
Caution
• Do not use cleaning agents or alcohol to clean your sound
processor or accessories.
• Turn your sound processor o before cleaning or performing
maintenance.
Every day
ꞏ Check all parts and any accessories you use (e.g. Snugt,
SoftWear pad) for dirt or moisture. Wipe the processing
unit, coil, cable, earhook and accessories with a soft dry
cloth. (You can leave accessories on the processing unit
while cleaning.)
ꞏ Keep your sound processor free from moisture by
drying it every night in your dry aid kit.
ꞏ Remove the battery module and make sure all the
contacts are clean. Carefully tap or blow on them to
remove any dirt. Wipe the contacts with a soft dry cloth.
ꞏ Keep accessories clean. Blow on connectors to remove
any dust and clean accessories with a soft dry cloth.
ꞏ Check the microphone protectors for signs of dirt or
grime and replace if needed. SeeChange microphone
cover on page 69.