Use
40 Nucleus 8 Sound Processor User Guide
3� Insert the battery module,
then twist to connect.
4� Plug the earphones into
the monitor earphone
adaptor.
Caution: Use only
Cochlear-approved
earphones.
5� Use the earphones to check that sound can be heard.
6� Remove the earphones and adaptor as soon as you have
nished monitoring.
Note
• Do not put the sound processor on the recipient’s implant
while using the monitor earphone adaptor, because there is
no signal to the coil while it is connected.
• Remember to reconnect the battery module and lock it to
your sound processor using the tamper-resistant lock.
To Next Page
Loading...
