Coda LINUS12C - Amplifier Unpacking and Features

17
2.1 Unpacking
Please unpack and inspect your new amplier for any damage that may have occurred during transit. If damage is found,
notify the transportation company immediately. Only you as the consignee may initiate a claim for shipping damage.
CODA Audio will be happy to cooperate fully as needed. Please save the shipping carton as evidence of damage for the
shipper's inspection.
Even if the amplier has arrived in perfect condition, save all packing materials for any future transport of the unit.
When shipping the LINUS12C amplier, always use the original shipping carton and packing materials. For maximum
protection, repack the unit as it was originally packed at the factory.
NOTE: Never ship the amplier without the original packaging materials.
2.2 The amplier
The LINUS12C amplier oers a power output of:
- 6000 W peak per channel @ 4 Ω
- 5500 W peak per channel @ 2.7 Ω
- 4800 W peak per channel @ 2 Ω.
For a complete overview of rated power data please refer to chapter 5 `SPECIFICATION´.
The LINUS12C power amplier is tted with a dual voltage Switched Mode Power Supply (SMPS) with automatic voltage
range selection for 115 V/230 V operation, which signicantly reduces the weight and size (only 2U) of the amplier. Using
SMPS, the seamlessly regulated symmetrical supply voltages of the power amplier are more stable and ecient than the
power supplies used in conventional ampliers.
The LINUS12C uses microprocessors for controlling and motoring the power amp. This has four main advantages over
more traditional power amp systems:
1. Integrated remote control
2. Extreme fast and accurate monitoring of all amplier parameters
3. Very fast triggering of protection features
4. Fast detection of failures.
The LINUS12C has been designed as an intelligent and powerful amplier for performing specialised tasks within a
complex audio system. Users can adapt the power amp to meet their specic audio requirements before use. The display
mounted on the front of the LINUS12C amplier allows the dierent functions to be accessed. Since there are a lot of
parameters available, it is important that users familiarise themselves thoroughly with the entire range of settings and
programmable features before using the power amp. If you have any questions regarding features and/or functions of your
LINUS12C amplier, CODA Audio will be pleased to provide you with further information. Alternatively, contact your dealer
or distributor.
LINUS12C 2. THE AMPLIFIER
2. THE AMPLIFIER
LIMIT
SIGNAL
PROTECT
MUTE
SEL
ESC
UP
DOWN
L I N U S 1 2 C
1 2
3
4
STORE