Compliance
30 Automatic Whip Antenna 3040 Installation Handbook
Introduction
This section describes how to ensure the 3040 Automatic
Whip Antenna complies with the European EMC Directive
89/336/EEC and the European LV Directive 73/23/EEC as
called up in the European R&TTE Directive 1999/5/EC.
This section also contains the requirements for FCC
compliance.
European R&TTE Directive
The 3040 Automatic Whip Antenna has been tested and
complies with the following standards and requirements
(articles of the R&TTE Directive):
• Article 3.1b: ETSI EN301489-1 V1.4.1
• Article 3.1b: ETSI EN301489-15 V1.2.1
• Article 3.1a: EN60950-1
Product marking and labelling
Any equipment supplied by Codan that satisfies these
requirements is identified by the , or
markings on the model label of the product.
Declaration of Conformity
The CE Declaration of Conformity for the product is listed on
page 40, Associated documents. This document can be made
available upon request to Codan or a Codan-authorised
supplier.
To Next Page
Loading...
Need help?
General
