6-14 Maintenance 8525B/8528 Technical Service Manual
Issue 6 Publication No: 15-02036
15. Peel off the backing sheet from the front face of the switch substrate
and place the escutcheon over the substrate. When the escutcheon is
correctly positioned press firmly all over its face to ensure its adhesion
to the substrate.
16. If the panel was originally fitted with selective calling switches use a
scalpel to cut out the required hole in the escutcheon. Refit the switches.
17. Reinstall the front panel on the transceiver or control head. Remake the
connections and test the transceiver.
n
To Next Page
Loading...
Need help?
General
