Code Alarm caSEC - Programming Feature Banks; Adjusting the Shock Sensor; Testing the Shock Sensor; Chirp Delete - User Accessible

212017 Voxx Electronics Corporation. All rights reserved.
Chirp Delete - User Accessible
System ARM/DISARM chirps can be toggled ON or OFF without entering the
programming feature banks.
1. Turn the ignition ON then OFF.
2. Press and release the valet/programming button 3 times. The system
will respond with 1 chirp for ON or 2 chirps for OFF.
Adjusting the Shock Sensor
1. Increase sensitivity by turning the adjustment dial clockwise.
2. Decrease sensitivity by turning the adjustment dial counter clockwise.
Testing the Shock Sensor
Armthesystemandwait6secondsforthezonetostabilize,thenrmlystrikethe
vehicles bumper.
User Selectable LED
This feature will control whether the LED is ON or OFF when the system is Armed/
Locked.ThiswillbeselectableinfeatureprogrammingORon-the-ywithoutentering
the programming feature banks.
1. Turn the ignition ON, OFF, ON, OFF.
2. Press and release the valet/programming button 3 times. The system
will respond with 1 chirp for ON or 2 chirps for OFF.