Code Blue IP1500 - Page 24

Code Blue
•
259 Hedcor Street
•
Holland, MI 49423 USA
•
800.205.7186
•
www.codeblue.com
GU-137-Bpage 24 of 40
IP1500/2500
User Guide
GeneralSettings
TheIP1500/2500speakerphonegeneralcongurationcanbeaccessedby:
1. ClickingonGeneral SettingsunderCode Blue(seefarleft-handcolumn).
2. InthissectionyoucanselecthowmanyringstheIP1500/2500willwaitbeforeansweringan
 incomingcall.
3. ClickthedownarrownexttoAnswerIntochangesettings.
4. The Aux Output 1checkbox,whenchecked,willenabletheAux Output 1onincoming
 callandisdisabledwhenincomingcallisterminated.
 ThisfeaturewasnotintendedtobeusedwithAux Outputsconguredwiththe
momentarily toggle (Hardware Settings Dialog)choice.
TheIP1500/2500canalsobeconguredwithastandardlocationmessage.
1. Clickonthedown arrownexttoLocation Recordingtoselectthisrecordingasthedefault
 LocationMessage.
» Thelocationmessagemustbeuploadedbeforethischoicecanbemade.SeeRecording’s
dialog.
2. Onceyouhaveconguredtheoptionsonthispage,clickSave Changes.