Code Blue ● 259 Hedcor Street ● Holland, MI ● 4923 USA ● 800.205.7186 ● www.codeblue.com Rev 6/2021 page 13 of 57 GU-164-A
5. Secure the housing to the wall – If you are securing to drywall, utilize drywall screws and anchors. If you are
securing to metal, utilize sheet metal screws. If you are securing to brick, use Tapcon screws. Fasten all screws
securely.
Important: Ensure that conduit is aligned with wiring.
7. Connect earth ground to the provided copper grounding lug using a minimum 14-gauge conductor.
8. Connect electrical and communications wiring using the wiring diagram below.
9. Follow all federal and local codes that apply.
Attach faceplate to enclosure using six security screws.
To Next Page
Loading...
