Code CR1428 User Manual

4/14/2016
D014465 CR1400 CR1000 CR2300 CR2600 CR3600 CR44X5 CR8000 CR900FD CR6000 CR5000 T500 Client Version ICD
Page 31 of 106
© 2013-2016 The Code Corporation  12393 South Gateway Park Place Suite 600, Draper, UT 84020  (801) 495-2200  FAX (801) 495-0280
Reg
Setting Name
Default (Hex)
Comment
0A
NEC 2 of 5 Symbology
0
Binary Dip Switch
Bit
Controls
Value
0
NEC 2 of 5 Decoding
0: Disabled
1: Enabled
1
Enable checksum checking
0: Disabled
1: Enabled
2
Remove checksum from the result
0: Disabled
1: Enabled
Checksum checking must be enabled by setting bit 1 in order
for checksum removal from the output (setting bit 2) to have
any effect.
Keywords: #2Of5
0B
Matrix 2 of 5
Symbology
0
Binary Dip Switch
Bit
Controls
Value
0
Matrix 2 of 5 Decoding
0: Disabled
1: Enabled
1
Enable checksum checking
0: Disabled
1: Enabled
2
Remove checksum from the
result
0: Disabled
1: Enabled
Checksum checking must be enabled by setting bit 1 in order
for checksum removal from the output (setting bit 2) to have
any effect.
Keywords: #2Of5
0C
Telepen Symbology
0
0: Disabled
1: Enabled
Keywords: #Telepen
0F
Targeting Control
1
CR5000:
CR5000RTC:
0
0: Targeting Disabled
1: Targeting Enabled
Keywords: #StandModes

Code CR1428 Specifications

General

Brand	Code
Model	CR1428
Category	Barcode Reader
Language	English