EasyManuals Logo

Code CR900FD User Manual

Code CR900FD
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
4/14/2016
D014465 CR1400 CR1000 CR2300 CR2600 CR3600 CR44X5 CR8000 CR900FD CR6000 CR5000 T500 Client Version ICD
Page 39 of 106
© 2013-2016 The Code Corporation
12393 South Gateway Park Place Suite 600, Draper, UT 84020
(801) 495-2200
FAX (801) 495-0280
Reg
Setting Name
Default (Hex)
Comment
37
Host
Acknowledgement
Time Limit (ms)
2BC
(#700)
Valid Range: 0 to 7FFFFFFF Milliseconds
After sending data to Host, the Reader waits up to this amount
of time for the acknowledgement from Host before declaring
failure.
Keywords: #Communications
39
Trigger 1
3
The specified event is posted upon press of this button.
For the CR2600, CR2600XHD, and CR2300, trigger 1 is the
button towards the back on the top of the reader. For the
CR3600, trigger 1 is the button to the left of the center
navigation buttons.
Note: Register C4 contains the list of valid events.
Keywords: #DefaultEvent
3A
Trigger 2
3
For the CR2600, CR2600XHD, and CR2300, trigger 2 is the
button towards the front on the top of the reader. For the
CR3600, trigger 2 is the button to the right of the center
navigation buttons.
Note: Register C4 contains the list of valid events.
Keywords: #DefaultEvent
3B
Trigger 3
0
The combination of pressing buttons defined by trigger 1 and
trigger 2 being pressed simultaneously.
Note: Register C4 contains the list of valid events.
Keywords: #DefaultEvent
3C
Trigger 4
3
For the CR2600, CR2600XHD, CR2300, and CR3600, trigger 4 is
the handle trigger.
Note: Register C4 contains the list of valid events.
Keywords: #DefaultEvent
3D
Trigger 5
0
The combination of pressing buttons defined by trigger 1 and
trigger 4 being pressed simultaneously.
Note: Register C4 contains the list of valid events.
Keywords: #DefaultEvent
3E
Trigger 6
0
The combination of pressing buttons defined by trigger 2 and
trigger 4 being pressed simultaneously.
Note: Register C4 contains the list of valid events.
Keywords: #DefaultEvent

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Code CR900FD and is the answer not in the manual?

Code CR900FD Specifications

General IconGeneral
BrandCode
ModelCR900FD
CategoryBarcode Reader
LanguageEnglish

Related product manuals