Code CR900FD - Page 72

4/14/2016
D014465 CR1400 CR1000 CR2300 CR2600 CR3600 CR44X5 CR8000 CR900FD CR6000 CR5000 T500 Client Version ICD
Page 72 of 106
© 2013-2016 The Code Corporation  12393 South Gateway Park Place Suite 600, Draper, UT 84020  (801) 495-2200  FAX (801) 495-0280
Reg
Setting Name
Default (Hex)
Comment
256
Decoding Options
10
(#16)
CortexDecoder decoding options.
Binary Dip Switch
Bit
Controls
Value
1
Basic Laser DPM
Keywords: #DPM
0: Disabled
1: Enabled
2
Basic inkjet/dot peen DPM
Keywords: #DPM
0: Disabled
1: Enabled
4
Low Contrast 1D
0: Disabled
1: Enabled
5
Dot peen dark on light (need DPM
license) Keywords: #DPM
0: Disabled
1: Enabled
6
Dot peen light on dark (DPM license
required) Keywords: #DPM
0: Disabled
1: Enabled
7
Laser/chemical etch
(DPM license required)
Keywords: #DPM
0: Disabled
1: Enabled
11
Robust Inkjet DPM
Keywords: #DPM
0: Disabled
1: Enabled
12
Light DPM (fast reading of all 1D/2D
and high contrast DPM)
Keywords: #DPM
0: Disabled
1: Enabled
Note: All other bits are Reserved
25B
Bluetooth® Keyboard
Discoverable Time (sec)
1E
(#30)
Valid Range: 0 to 7FFFFFFF (#2147483647) Seconds
The time that the reader will be discoverable to other
Bluetooth® devices when discoverable command is sent to the
reader (see Section 10.1for more info on discoverable
command)
25D
Disconnect when Set
Discoverable
1
0: Disabled
1: Enabled
If Enabled, disconnect when the reader is set to discoverable
mode (see Section 10.1 for more info on the discoverable
command)