Code CR900FD - Page 73

4/14/2016
D014465 CR1400 CR1000 CR2300 CR2600 CR3600 CR44X5 CR8000 CR900FD CR6000 CR5000 T500 Client Version ICD
Page 73 of 106
© 2013-2016 The Code Corporation  12393 South Gateway Park Place Suite 600, Draper, UT 84020  (801) 495-2200  FAX (801) 495-0280
Reg
Setting Name
Default (Hex)
Comment
25E
Connection Delay (ms)
–Bluetooth® Keyboard
0
Valid Range: 0 to 7FFFFFFF (#2147483647) Milliseconds
This is the additional amount of time that the reader will wait
after connecting before sending data. The delay will only be
used with the associated communication mode.
262
Define decode data
encoding and
conversion method
0
Used to specify the input encoding of the data being decoded.
The data will either be used as is or be converted to Unicode
code points for the specified input encoding, based on the
setting below.
Value
Description
0
Define that the input encoding is ASCII – do not convert
1
Define that the input encoding is ASCII and convert the
ASCII to Unicode code points
2
Define that the input encoding is UTF-8 and convert the
UTF-8 to Unicode code points
Keywords: #DataEncoding; #KeyboardMap
270
Requested Download
Memory Allocation Size
0
This is the optimal amount of memory to allocate for the
current file download to the reader.
Persistence: Reset-on-boot
271
Connection Delay (ms)
–iAP2 External
Accessory mode
0
Valid Range: 0 to 7FFFFFFF (#2147483647) Milliseconds
This is the additional amount of time that the reader will wait
after connecting before sending data. The delay will only be
used with the associated communication mode.
272
Connection Delay (ms)
–iAP2 Keyboard mode
0
Valid Range: 0 to 7FFFFFFF (#2147483647) Milliseconds
This is the additional amount of time that the reader will wait
after connecting before sending data. The delay will only be
used with the associated communication mode.
273
Max Error Log Size
(bytes)
C8 * 1000
((#200) *
(#1024))
This is the maximum size of the error log in bytes. It will not
exceed it by more than the size of one error log entry.
274
Error Log Truncation
Percent
46
(#70)
Valid Range: 0 to 64 (#100) Percent
When the error log exceeds the maximum length, it will be
truncated to this percentage of its maximum size