Code CR900FD User Manual

4/14/2016
D014465 CR1400 CR1000 CR2300 CR2600 CR3600 CR44X5 CR8000 CR900FD CR6000 CR5000 T500 Client Version ICD
Page 85 of 106
© 2013-2016 The Code Corporation  12393 South Gateway Park Place Suite 600, Draper, UT 84020  (801) 495-2200  FAX (801) 495-0280
Reg
Setting Name
Default (Hex)
Comment
2B2
Illumination Axis
Control
0
CR5000:
CR5000RTC:
70
(#112)
Internal illumination control
For CR5000 & CR5000RTC:
Bit
Controls
Value
0-2
Unused
3-4
CR5000 &
CR5000RTC
quick decode
behavior
0: Invalid
1: Use red illumination
2: Use IR illumination
3: Use red and IR illumination
5-6
CR5000 &
CR5000RTC
standard
decode
behavior
0: Use the same as the CR5000 &
CR5000RTC quick decode behavior
1: Use red illumination + fixed 20%
IR
2: Use red illumination + fixed 30%
IR
3: Use red illumination only
Note: Applies to CR5000 & CR5000RTC only. All other readers
will ignore this register.
Keywords: #AGC, #AGCMode, #DPM
2B4
Public Sector Behavior
0
Binary Dip Switch
Bit
Controls
Value
0
Enable public-sector parsing
0: Disabled
1: Enabled
1
Enable JSON formatting
0: Disabled
1: Enabled
2
Reject raw data (non-public-sector-
formatted decodes are considered an
error condition)
0: Disabled
1: Enabled
3
Enable Stand Alone Age Verification
(CR5000RTC only)
0: Disabled
1: Enabled
Note: Bit 0, 1, & 2 are for DL Formatting and require license
5014. Bit 3 is for Stand Alone Age Verification (CR5000RTC
only) and require license 5017.
Keywords: #AgeVerification

Code CR900FD Specifications

General

Brand	Code
Model	CR900FD
Category	Barcode Reader
Language	English