10
D027166_02 User Manual
16.0 - CR950 Maintenance
The CR950 device needs only a minimum of maintenance to operate. A few tips are given below for maintenance suggestions.
Cleaning the CR950 Window
CR950 window should be clean to allow the best performance of the device. The window is the clear plastic piece inside the head of the
reader. Do not touch the window. Your CR950 uses CMOS technology that is much like a digital camera. A dirty window may stop the CR950
from reading barcodes.
If the window becomes dirty, clean it with a soft, non-abrasive cloth or a facial tissue (no lotions or additives) that has been moistened with
water. A mild detergent may be used to clean the window, but the window should be wiped with a water moistened cloth or tissue after using
the detergent.
Technical Support and Returns
For returns or technical support visit www.codecorp.com/codesupport.php.
To Next Page
Loading...
Need help?
General
