OPERATOR PROGRAM
Accessing the Operators Mode
6. Accessing the Operator program is by pressing the PROG key on the internal keyboard.
The display will show:
PRESS DRINK TO DISPLAY COUNTER
DISPLAY COUNTER
7. The DISPLAY COUNTER option is accessed on entering the Operator’s Program. The
resettable vend counts may be viewed by pressing each drink key (as shown on the
keypad) in turn.
8. To access other options, press PROG on the internal keypad. The other options are as
follows:
Total Vends
Reset Counters
Disable Vends
Reset Grout Counter
View Ingredient Counters
Machine Serial No.
TOTAL VENDS
9. Access the Total Vends Count option using PROG key, the display will show total vend
count.
RESET COUNTERS
10. Access Reset Counters by using PROG key, to clear drink counters press ENTER. The
display will show:
ARE YOU SURE
ENTER (Y) ESC (N)
DISABLE VENDS
11. Access the DISABLE VENDS option by pressing the PROG key and then press ENTER
when DISABLE VENDS is displayed. This will then disable all of the vends selections until
they are re enabled.
VIEW INGREDIENT COUNTERS
12. Access the View Ingredient Counters option by using PROG key. Press ENTER to display
the first counter, then press the UP arrow to scroll through the others.
To Next Page
Loading...
