COFFEtek VITRO S3 RANGE - Engineer Program Functions

COFFEtek LTD
17
28/02/2017
Revision 1
VITRO S3
ENGINEER PROGRAM
Accessing the Engineer Program
14. The operator program must be accessed before the Engineer Program can be accessed,
the operation is as follows:
 Press PROG to access the Operator Program, the display will show:
PRESS DRINK TO DISPLAY COUNTER
 Press PROG again, the display will show:
TOTAL VENDS
 Now, press the “Star” key on the internal keypad. The display will now show:
SELECT DRINK TO MODIFY