Wash and dry the dispense area
Wipe clean all accessible inner and outer surfaces of the machine. Wipe dry.
Refit the whipper bases, paddles, mixing bowls, tubes and dispense nozzles and brewer
parts. The assembly procedure for the brewer is the reverse of the disassembly procedure.
Ensure that both brewer-locking levers are in the locked, (horizontal position) before
proceeding to the next section.
Replace the grouts collection bucket and refit the front cover, ingredient canister
Turn on the power. Note the brewer will cycle to reach its home position.
RESET COUNTERS
Press star key (centre of internal keypad) to bring up menu. Screen will change to “GROUP
TRANSIENTS”
Use up or down arrow to scroll between “GROUP TRANSIENTS”, and “GROUT BIN”,
Reset “GROUT BIN”
To Next Page
Loading...
