COFFEtek VITRO S3 RANGE - Services Required for Vitro S3

COFFEtek LTD
7
28/02/2017
Revision 1
VITRO S3
SERVICES REQUIRED
Electrical Supply
5.
(a) Single Heater Operation
Supply voltage : 230V~, 50Hz, single phase, fused supply
Current rating : 10A/16A
(b) The fused electrical supply should terminate at an appropriate isolator located within
1m of the beverage machine.
Water Supply
6.
(a) 15mm dia. Water mains supply, terminating at a convenient stop tap located within
1m of the beverage machine.
(b) Water pressure : 0.1 MPa minimum, 0.8 MPa maximum
(c) A 15mm double backcheck valve, with inspection port, should be fitted prior to the
flexible hose. The mains Water Supply should be fitted with a suitable water blocker.