COFFEtek VITRO S3 RANGE - Page 39

COFFEtek LTD
39
28/02/2017
Revision 1
VITRO S3
DOWNLIGHT ERROR
On, off, flash,alternate.
RGB LIGHT STANDBY
On (white), off, custom , cycle.
RGB LIGHT VENDING
On (white), off, custom , cycle.
RGB LIGHT VEND
COMPLETE
On (white), off, custom , cycle.
RGB LIGHT ERROR
On (white), off, custom , cycle.
RGB CUSTOM
COLOUR
This is the custom colour to use when the RGB light behaviour is set to
custom. It is defined by Red Green and Blue values.
PRESS DRINK FOR FIXED COUNTERS
46. The PRESS DRINK FOR FIXED COUNTERS option allows the engineer to view the
resettable vend counters associated with a selected drink.
 Press the drink selection key on the keypad.
 Press prog to exit from the PRESS DRINK FOR FIXED COUNTERS option and
access the next Engineer's Program option.
EDIT BIN NAME
 Press ENTER. Display will show: -
A B C D
(  ) () ()
 Select canister to set Bin Name by using  (LEFT)  (RIGHT) and ENTER.
 Press  or  to scroll to option required to change.
 Press ENTER.
 Press  to scroll to next canister.
SET FACTORY DEFAULTS
47. THE FACTORY DEFAULT option will allow the Engineer to initialise a new MPU Board with
default settings, if not using Palmtop PC.
 Press ENTER; the display will show: