COGES Aeterna - 1.2. Technical Specifications

8
CHAPTER 1
®
1.2. Technical Specifications
1.2.1. Specifications of the Coin Mechanism
fig. 2
Dimensions (LxPxH)............................................. mm. 138 x 80 x 382
Weight ........................................................................... 1,7 Kg.
Power supply.................................... 24V AC (Executive) 24V DC (MDB)
Max. absorbed power............................................................. 20 W
Absorbed power at rest ............................................................4 W
Operating temperature ...................................................... 0°/+50°
Acceptance rate................................................2/3 coins per second
No. recognisable coins .............................................................. 60
Max. diameter of accepted coins............................................. 32 mm
Max. diameter of coins addressed to tubes................................. 26 mm
Coin thickness .................................................. from 1 up to 3,2 mm
Max. no. installable tubes ............................................................5
Tube height .....................................................................175 mm
Tube capacity ................................................. from 72 up to 97 coins
Construction material for mechanical parts ....................... Polycarbonate
Price lines:
E.C.S. serial Change-giver coin mechanism...................................... 50
E.C.S. serial C-G Coin M. with power interface and parallel VM ...............5
Protocols used .. BDV Master, MDB Slave level 2 and 3, Executive and Parallel
Directive.............................Electromagnetic compatibility 2004/108/EC
Attention: make sure that the connected power supply keeps at least 30 VA only for the
Aeterna Change-Giver Coin Mechanism
. Further details concerning the dimensions of the
Coin Mechanism can be found in the drawing in Appendix
369 mm
382 mm
138 mm
8
0
m
m