CognitiveTPG DLXi - Page 10

10
CAUTION: DO NOT
TOUCH PRINTHEAD.
ELECTROSTATIC
DISCHARGE ESD
FROM THE HUMAN
BODY OR OTHER
OBJECTS CAN
DAMAGE PRINTHEAD.
PLEASE USE STATIC
SAFE PROCEDURES
WHEN WORKING
WITH PRINTHEAD.
PRINTHEAD MAY BE
HOT AFTER PRINTING.
NOTE: USE ONLY
COGNITIVETPG
APPROVED
MEDIA. FOR MORE
INFORMATION ON
COGNITIVETPG
APPROVED SUPPLIES,
CONTACT US AT
8007328950 OR AT
COGNITIVETPG.COM.

1. Unpack and prepare outward
wound or inward wound media for
installation into printer.
2. Use paper guide and
spindle to install media
roll as shown.
NOTE: PRINTER IS
SHOWN WITH MEDIA
COVER REMOVED FOR
CLARITY. THERMAL
TRANSFER TT
MODEL USED FOR
ILLUSTRATION.
1
3
Printhead
Printhead release
Paper guide
Paper spindle
Label roll
Drive roller
1
2
3
ON/OFF switch
!
CAUTION!