Need help?Do you have a question about the Colortrac Z Series and is the answer not in the manual?
Details specifications for Z24 and Z36 scanner models, including width, thickness, and weight.
Provides website and contact details for technical support, including username and password.
General safety precautions regarding electrical, mechanical, weight, rollers, and sharp edges.
Conforms to EMC and FCC standards, ensuring no interference with other devices.
Explains potential variations in manual photos due to development stages.
Lists parts that wear out according to usage and are not replaced under warranty.
Details the specifications of the external power supply unit for the scanner.
Visual representation of scanner components and their interconnections.
Describes the scanner's orientation and correct media insertion for scanning.
Step-by-step instructions to remove and refit the left hand end cover.
Step-by-step instructions to remove and refit the right hand end cover.
Instructions for removing and refitting the top lid cover.
Steps to remove and refit the interface board cover.
Lists components that cannot be individually replaced, only as part of an assembly.
Detailed steps for removing and replacing the interface board.
Procedures for saving data, downloading utilities, and replacing the main board.
Instructions for removing and refitting the timing belt.
Step-by-step guide for removing and refitting the motor.
Procedures for removing and replacing the microswitch.
Steps to remove and refit the paper sensors.
Instructions for removing, cleaning, and refitting the scanner glass.
Steps to remove and refit the paper hold up plate.
Procedure for separating the CIS lid assembly from the lower chassis.
Steps to adjust the scanner to sit level with the printer.
Instructions for adjusting the scanner height to touch the printer lid.
Procedure to adjust the scanner lifting force.
How to adjust the AIO pole screw if rotation is too easy.
Steps to tighten screws and nuts to adjust AIO tilt.
How to view system version, update, MAC, and IP addresses.
Steps to perform a system recovery, including selecting an image file.
Instructions for updating the system software via USB.
Guide to access the OS via a hidden button and password.
Notes on power loss during updates and controller boot issues.
How to access the engineer menu to adjust scanner settings.
Adjusting motor speed to compensate for scan length inaccuracies.
Adjusting the delay before document feeding after insertion.
Adjusting top/bottom borders of the scanned image.
Fine-tuning stitch values for each SingleSensor section.
Restoring scanner calibration data to the main board.
List of error codes, module names, and descriptions for troubleshooting.
General| Type | Large Format Scanner |
|---|---|
| Color Depth | 48-bit color |
| Scanning Technology | CCD |
| Connectivity | USB |
| Operating System Compatibility | Windows |
| Supported Media Types | Paper, film |
| Dimensions | Varies by model |
| Weight | Varies by model |
To Next Page