Coltech MDDE-10DEN3-QA3 - Buttons and functions; Component Identification

10
ENGLISH
1
2
3
4
5
6
7
8
• If compressors or compressor oils are to be removed, ensure that they have been
evacuated to anacceptable level to make certain that flammable refrigerant does
not remain within thelubricant. Theevacuation process shall be carried out prior to
returning thecompressor to thesuppliers. Only electric heating to thecompressor
body shall be employed to accelerate this process. When oil is drained from
asystem, it shall be carried out safely.
Buttons and functions
1. Water reservoir
2. Air filter (behind theair intake grille)
3. Control panel
4. Carrying handle
5. Air filter (behind theair intake grille)
6. Cable tidy (for storage)
7. Air outlet
8. Hose connection for continuous operation