27
WEEKLY MAINTENANCE
ADJUSTING THE SIDE BARS
It is necessary to adjust the height of the side bars at regular intervals.
This operation must be carried out with the base lowered.
1. Loosen the knob (1)
2. Tighten the register (2) to raise the side bar, or loosen it (2) to lower
the side bar
3. When the adjustment has been completed, fix the knob (1)
4. Remove the retaining clip (1)
5. Remove the side bar (2)
6. Adjust the height of the supporting nut (3)
7. Put the side bar and the retaining clip back in position
Bear in mind that the side bar must be parallel to the floor.
These adjustments must be made on both side bars.
3
2
1
1
2
To Next Page
Loading...
