InteliLite 4 AMF20+AMF25 Operator Guide 4
GCB Status. Consists of 3 green LEDs. The middle green LED is on if GCB is closed. It is
driven by GCB CLOSE/OPEN output orby GCB feedback signal. Side green LEDs are on
in case the generatorstatus indicatoris ok.
LOAD. Green LED is ON if load is supplied by mains orby generator. It means, that
Genset ormains is OK and propercircuit breakeris closed.
MCB Status.Consists of 3 green LEDs. The middle green LED is on if MCB is closed. It is
driven by MCB CLOSE/OPEN output orby MCB feedback signal. Side green LEDs are on
in case the mains status indicatoris ok.
6 back to Front panel elements
To Next Page
Loading...
