Need help?Do you have a question about the Comark RF500A and is the answer not in the manual?
Details the components included in the RF500A Gateway kit.
Lists items packed with RF500 series transmitters for initial setup.
Describes the two variants of the RF500 Gateway: Standard and PoE.
Lists available RF500 transmitters and their key features.
Enumerates optional accessories for the RF500 system, like bridges and sensors.
Provides essential warnings regarding equipment handling, power, and battery safety.
Step-by-step instructions for powering up the RF500A Gateway.
Covers procedures for switching the Gateway off and performing a reset.
Lists the system requirements for installing and using RF500A-CONFIG software.
Guides through downloading and installing necessary USB drivers and the configuration utility.
Details prerequisites for commissioning the RF500A Gateway.
Instructions for configuring the Gateway's IP address using RF500A-CONFIG.
Process for setting up the primary administrator account for the Gateway.
Procedure to change the display language for the Gateway interface and emails.
How to assign a unique name to the Gateway for identification.
Steps to set the correct date and time for the Gateway.
Inputting static IP, subnet mask, and default gateway for network connectivity.
Explains the function of the LEDs on the front of the RF500A Gateway.
Details the bottom connections, alarm outputs, and side switches of the Gateway.
Describes the visual indicators and LCD display on RF500 series transmitters.
Information on connecting the RF542 transmitter to the network via Ethernet.
Instructions for physically fixing the Gateway and transmitters securely.
Guidance on mains wiring and ensuring proper ventilation for the Gateway.
Overview of the RF500A Gateway's role and capabilities in the monitoring system.
How data is reliably retrieved and re-transmitted between transmitters and the Gateway.
Guidance on selecting and ordering the correct battery types for transmitters.
Step-by-step instructions for safely replacing the battery in RF500 transmitters.
How the Gateway indicates low battery status on transmitters and how it's cleared.
Diagrams and pin assignments for transmitter door and power connectors.
Detailed pinout for Lumberg connectors used with various transmitters.
Details on power input requirements and environmental operating/storage limits.
Specific temperature and humidity ranges for RF51X and RF542 transmitters.
Information on how to obtain service or repair for Comark equipment.
Definitions of terms like Avg, Backbone, Event Logging, Last, Location, Login Page.
Definitions for terms like Max, Min, Mesh Network, PST, Radio-Rate, Self-Healing, Task.
To Next Page
General