Comark RF500A - RF500 A-CONFIG - RF500 A Configuration Utility; Requirements for RF500 A-CONFIG; Installation of USB Drivers; Obtain Comark USB Drivers

13
RF500A-CONFIG - RF500A Conguration Utility
Each Gateway is shipped with a default IP address of 192.168.25.220. The Gateway IP address must be changed to
the Static IP address provided by your IT department before connecting to the LAN.
Comark Instruments provides a Windows utility: RF500A-CONFIG to allow changing or viewing the Gateway IP
address via the USB port.
Requirements for RF500A-CONFIG
• Windows XP, Windows XP 64-bit or Windows 7, Windows 7 64-bit
• Comark USB Drivers (The USB drivers must be installed prior to installing RF500A-CONFIG)
• Oracle (previously Sun) Java Runtime Environment 1.6.0 or later
Installation of USB Drivers
Obtain Comark USB Drivers
Comark USB Drivers can be downloaded from the following websites:
• http://www.comarkinstruments.com/software.tpl – UK and International
• http://www.comarkusa.com/software.tpl – USA, Canada and South America
Click the Comark USB Driver.exe link shown on web page above. Fill in the form and tick the box to conrm you
have read the Software License Agreement. Proceed to download the le and choose the save option to start the
download.