EQUIPMENT MANUAL FOR SP-2110
SP-2110 QE
Copyright - refer to title page
Page 31
ENU Status : 1-3-1
6 APPENDICES
6.1 APPENDIX A: TOOLS FOR INSTALLATION AND MAINTENANCE
The only tools required are for installing and fixing screws and tightening the SMA connectors.
Hereinafter is the recommended list for installation and routine maintenance:
Description
Slotted screwdriver
Philips screwdriver
Electrically operated drill and masonry drill bit for wall plug
Anti-static wrist strap
Spanner fro SMA connectors
Side cutter
RF power meter (e.g. Bird 5000)
To Next Page
Loading...