EasyManua.ls Logo

Comcast Custom DVR-3 Device User Manual

Comcast Custom DVR-3 Device
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
COMCAST INSTRUCTIONS
You must unlock the remote first. When
doing this procedure, make sure the CABLE
light blinks 4 times. If it only blinks twice, then
do these steps again, until you see it blink 4
times. After it blinks four times, you do not
have to do this unlock instructions again.
UNLOCK INSTRUCTIONS
To unlock CABLE mode (so you can program
the remote to your cable box):
1. Press and release CABLE key.
2. Press and hold SETUP key until CABLE
key blinks twice and goes off.
3. Enter code 982 ; CABLE LIGHT WILL
BLINK 4 TIMES TO CONFIRM CABLE
KEY UNLOCKED.
Once you have completed the unlock
sequence and the CABLE light blinked four
times to confirm unlock, proceed to
programming the CABLE mode:
PROGRAMMING INSTRUCTIONS
Instructions for programming the CABLE
mode button:
Note: Look at the back of your cable box to
find what brand manufactures your unit;
usually Motorola or Scientific Atlanta.
1. Make sure cable box is turned on.
2. Press and release CABLE button.
3. Press and hold SETUP key unit CABLE
light blinks twice and turns off. Release
the key.
4. Type in code (codes are located in
booklet that was provided with your
remote). Mode key will blink twice to
confirm acceptance of the code.
Now try it on cable box. It should be working.
If not, repeat steps 1-4 with the next code in
code list.
CODES FOR CABLE SET TO BOXES
WARNING: Find the brand name that is
located on the back of your set-top-box. DO
NOT refer to the brand name located on the
front. If you do not see a brand name on the
back of your box, please try the most
common codes first like 01877 (Scientific
Atlanta), 01376 (Motorola), and 00144
(Samsung).
ABC: 00003, 00008
Americast: 00899
Bell South: 00899
Comcast: 01982
Digeo: 01187
Director: 00476
General Instrument: 00476, 00810, 00276,
00003
GoldStar: 00144
Hamlin: 00009, 00273
Jerrold: 00476, 00810, 00276, 00003
Memorex: 00000
Motorola: 01376, 00476, 00810, 00276,
01187, 01254
Pace: 01877, 00237, 00008
Panasonic: 00000, 00107, 01982
Paragon: 00000
Philips: 01305, 00317
Pioneer: 01877, 00877, 00144, 00533
Pulsar: 00000
Quasar: 00000
Regal: 00279, 00273
Runco: 00000
Samsung: 00144
Scientific Atlanta: 01877, 00877, 00477,
00008
Sony: 01006
Starcom: 00003
Supercable: 00276
Torx: 00003
Toshiba: 00000
Zenith: 00000, 00525, 00899
To program the TV or AUX mode buttons,
refer to the full manual that was provided with
remote.
!
Question and Answer IconNeed help?

Do you have a question about the Comcast Custom DVR-3 Device and is the answer not in the manual?

Comcast Custom DVR-3 Device Specifications

General IconGeneral
Device TypeRemote Control
BrandComcast
ModelCustom DVR-3
Voice ControlYes
BacklightNo
ColorBlack
Power SourceBattery
Wireless ConnectivityRF (Radio Frequency)
CompatibilityComcast Xfinity X1 DVRs

Summary

COMCAST REMOTE SETUP

UNLOCKING CABLE MODE

Procedure to unlock CABLE mode for remote programming.

PROGRAMMING CABLE MODE

Steps to program the CABLE mode button on the remote.

CABLE BOX REMOTE CODES

REMOTE OVERVIEW AND INSTALLATION

INSTALLING BATTERIES

Instructions for inserting AA batteries into the remote control.

REMOTE FEATURES AND PROGRAMMING

FEATURES AND FUNCTIONS

Description of remote control keys and their operational functions.

PROGRAMMING DEVICE CONTROL

Steps to program the remote to control various home entertainment devices.

ADVANCED REMOTE OPERATIONS

SEARCHING AND CHECKING CODES

Methods to find and verify remote codes for device setup.

VOLUME AND CHANNEL CONTROL LOCKS

Settings for volume control and channel access lock management.

REMOTE TROUBLESHOOTING

Related product manuals