9
Connecting devices to your TV
Back View
Power input
Press restart
button to reboot
HEADPHONE
AV IN
VIDEOL
R
Power button:
Hold it for 30 seconds to
restore factory settings
If you choose not to connect your devices during the initial setup, you can always
connect them later by following the instructions below. Please note that in order
to connect these devices to your TV, you’ll need the appropriate cables and
adapters, none of which are included with your TV.
Connecting an antenna
To connect your TV to an antenna, plug one end of a coax cable (not included)
into your TV’s ANT/CABLE port, and the other end into your device’s ANT OUT
port (see Table 1). For the best picture and color, make sure your cables are
connected securely.
When you rst turn on your TV, you’ll be prompted to connect
any devices you might have, such as antennas, cable boxes,
gaming systems, and media players. You’ll get step-by-step
instructions on your TV screen.
To Next Page
Loading...