3
Set up your remote in just a few easy steps
Before you can use your remote, you’ll need to insert the batteries. To do that:
1. Push the battery cover down and slide it o the remote
2. Insert the 2 included AAA batteries, making sure to match the (+) and
(-) ends of the batteries with the (+) and (-) ends indicated in the battery
compartment
3. Slide the battery cover back onto the remote
Be careful when handling batteries!
• Remove the batteries from your remote if you don’t plan on using it for a while
• Don’t mix old and new batteries
• Don’t mix alkaline, standard (carbon-zinc), or rechargeable (NiCd or NiMH) batteries
• Properly dispose of old batteries in a designated area – don’t throw them into a re or in the
garbage
• If the batteries leak, be sure to clean the battery compartment and wash any skin that might
have come in contact with battery chemicals
• Contact your TV manufacturer and stop using your remote immediately if it gets warm or hot
during use
Setting up your remote
To Next Page
Loading...
Need help?
General
