Section 3: Using the MicroBlaster MicroBlaster MB1000
Comco Inc. 3-12 Issue Date: July 2016
General Operation of the MicroBlaster
This section gives step-by-step procedures on how to use
the MicroBlaster. Before proceeding, make sure you have:
√ Reviewed the safety precautions in the introductory
selection of this manual.
√ Properly set up your MicroBlaster according to the
procedures in Section 2.
√ Selected the proper abrasive for your application.
√ Installed the proper tank orifice for the abrasive powder
you are using.
√ Selected the proper nozzle for your application.
To Next Page
Loading...