Comelit 1998A - I1 - Change Time; I2 - Change Date; I3 - Day;Night Automatic Mode; I3.1 - Activation;Deactivation

15
I1 - Change time
1. press the MENU key and the 1-CHANGE TIME key:
1-CHANGE TIME
2-CHANGE DATE
2. the cursor will be positioned on the first digit. Enter the
time using the alphanumeric keypad, moving the cursor
using the
keys;
SET TIME
00:00
3. press OK to confirm;
f press ESC to return to the main screen.
I2 - Change date
1. press the MENU key and the 2-CHANGE DATE key;
1-CHANGE TIME
2-CHANGE DATE
2. the cursor will be positioned on the first digit. Enter the
date using the alphanumeric keypad, moving the cursor
using the keys;
SET DATE
00/00/00
3. press OK to confirm;
4. press
, until the desired day appears on the display;
ENTER DAY:
MON
5. press OK to confirm;
f press ESC to return to the main screen.
I3 - Day/night automatic mode
You can decide to organise the week by selecting one of
these three operating modes for each day:
• AUTO: the system passes from DAY mode to NIGHT
mode at the programmed times.
It is not possible to decide on dierent time bands for
days during which the system operates in AUTO mode.
• NIGHT: the system is in this mode for the whole day.
• DAY: the system is in this mode for the whole day.
The system can be set to allow automatic passage from
DAY mode to NIGHT mode at specific times which can be
programmed by the user. A MAXIMUM of 4 TIMES can be
set.
It is extremely important to set the times for switching from
one mode to another correctly.
TIME 1: determines the first mode switch: from NIGHT mode
to DAY mode
TIME 2: determines the second mode switch: from DAY mode
to NIGHT mode
TIME 3: determines the third mode switch: from NIGHT mode
to DAY mode
TIME 4: determines the fourth mode switch: from DAY mode
to NIGHT mode.
All 4 TIMES must always be set (as shown in the following
example) even though only 2 switchovers are needed.
Example:
You want to configure the switchboard with the following
parameters:
07:00 – 12:00 Day mode operation
13:00 – 22:00 Day mode operation
TIME 1: 07:00 » NIGHT / DAY
TIME 2: 12:00 » DAY / NIGHT
TIME 3: 13:00 » NIGHT / DAY
TIME 4: 22:00 » DAY / NIGHT
I3.1 - Activation/deactivation
1. press the MENU key and use the
keys to view the
3-DAY/NIGHT AUTOMATIC menu, then press 3;
3-DAY/NIGHT AUTOMATIC
2. press the 1-ON/OFF, key to activate or deactivate the
function;
1-ON/OFF
2-SET TIMES
SERVICE
ACTIVE
SERVICE
NON ACTIVE
3. press ESC to return to the main screen.
I3.2 - Set times in auto mode
1. press the MENU key and use the
keys to view the
3-DAY/NIGHT AUTOMATIC menu, then press 3;
3-DAY/NIGHT
AUTOMATIC
2. press the 2-SET TIME key;
1-ON/OFF
2-SET TIMES
3. 00:00 is the default time, the cursor will be positioned on
the first digit. Enter the time using the alphanumeric
keypad, moving the cursor using the keys ;
TIME 1:
00:00
4. to confirm and move on to the next time, press OK and
repeat the procedure for all 4 times;
TIME 2:
00:00
5. press ESC repeatedly to return to the main screen.
I3.3 - Weekly programming
1. press the MENU key and use the
keys to view the
3-DAY/NIGHT AUTOMATIC menu, then press 3;
3-DAY/NIGHT
AUTOMATIC
2. use the key to view the 3-WEEK PROGRAM menu,
then press 3;
3-WEEK
PROGRAM
3. press to select one of the 3 operating modes (MODES:
AUTO- DAY- NIGHT)